Wanhao i3 Z-axis bearing block

Since extending the Z-axis on my wanhao i3 printer I discovered that there was a small amount of ringing toward the middle of the axis when printing at high speeds. To alleviate this I decided to use the feed screw to provide extra support. I did this by putting a small bearing block at the…

WANHAO Duplicator i3 Z-Axis extension

WANHAO Duplicator i3 Z-Axis extension Decided to extend the Z axis on my Wanhao i3 printer as it was wanting to print some rather tall teardrop lampshades. The whole process is very simple and only requires about $40 worth of parts, you will need: 1.5 meters of 60 x 3mm equal mill aluminium angle. This…